SERIES: What Does ABORT LOCK/TEMP LOCK Mean on My Ignition Interlock?

Did you receive an ABORT LOCK or TEMP LOCK message on your Smart Start Ignition Interlock Device? There’s no need to worry about this message, and it doesn’t mean you are receiving a violation.

ABORT LOCK or TEMP LOCK means that you have exceeded the allowed number of aborts during a 15-minute period. A passing test did not occur in other words.

Your device could also read this result as LOCK XX:XX. The X’s will be numbers on your screen representing a certain countdown time. You’ll need to wait until the countdown completes before you attempt another test.

What you need to do is adjust how you are testing with your Ignition Interlock.

How Do I Fix My Testing with the ABORT LOCK/TEMP LOCK Result?

Keep in mind that this does not mean a failed test! Take a few deep breaths, rinse your mouth with water, and attempt your Ignition Interlock test again. We also advise blowing air through your nose as you perform your test to maintain a consistent airflow.

If you continue to have trouble, you always have our Customer Care Center team to help. Give us a call at (800) 831-3299 and we can determine the error and adjust your testing pattern. You can also review the Ignition Interlock training video and manual again on our website.

There you have it! If you are receiving other messages on your device that you’re unclear of, you can find out what they mean on our blog.

1. Blow Longer
   
2. Blow Softer
3. Abort Tamper
4. Don’t Inhale
5. Mouth Closer
6. Recall 3

Need an Ignition Interlock?

If you must install an Ignition Interlock per a court or state order, choose Smart Start. We can assist you from start to finish during your program with a reliable device and service. Fill out our short online form or call at (800) 831-3299.